Quality System and Audit Responsible
Establish, maintain and audit Lear Rabat QMS according Lear requirements GPM, Customer requirements and ISO/IATF standard; and follow the calibration.
Your missions:
- Directs and oversees quality audit at Plant level according to the requirements of the customers, and the international quality system
- Responsible to optimize certification results and to coordinate actions among the different departments
- Defines guidelines for new certifications. Updates audits documentation.
- Defines and communicates guidelines & procedures for audits and certifications, ensuring that related documentation is updated.
- Carries out quality systems audits.
- Ensures that action plans and corrective actions are prepared, implemented and effective.
To be successful for this role:
- Technical Engineer Bac+5
- Minimum 5 years of proven experience in a similar position
- Deep knowledge quality Management IATF/VDA/ ISO19011,
- Good Knowledge Core tools
- Developed Leadership
- Know how to retain the team around him
- Ability to prioritize work
Language Skills:
- French
- English
Work Location:
- Rabat Plant
Continuous Improvement Responsible
We are hiring for Rabat Plant a CI Coordinator able to improve the outcomes of manufacturing and develop strong operational excellence strategy. Support the executive team to increase the processes efficiencies, optimize costs and increase customer satisfaction.
Your missions:
- Develop consistent Value Stream Maps (VSMs) at assigned site.
- Partner with all site leaders from executive, middle, and associate level teams.
- Ensure a consistent site project pipeline
- Work closely with the CI global team to ensure Lean, Six Sigma and Best Practices (LSS & BP) compliance and implementation.
- Identify and work to remove barriers that slow or prevent the successful attainment of LSS & BP across the site enterprise.
- Deploy LSS & BP strategy across the site enterprise, ensuring common company training compliance and understanding at all levels of the organization
- Partner with Site executives and initiate Policy Deployment Strategy (PDS) for Performance, Goals, and Objectives
To be successful for this role:
- Minimum 5 years of proven experience in a similar position
- Experience with Lean, Six Sigma and Best Practices
- Good Communication skills
- Solid knowledge in management items
- Team management skills
- Ability to prioritize work
Language Skills:
- French
- English
Work Location:
- Rabat Plant
Inventory Controller
Les missions :
- Manage, analyze, and control, material flow in the plant (warehouse/line production), with the aim to optimize the flow, stock accuracy level for RM and sub-assemblies.
- contribute in economic targets in term of continuous improvements
- Ensure 5S in stock areas
- collaborate for HSE in logistic premises
- Audit the administrative and material flow in the reception for productive and non-productive materials
- Manage returns in the system for suppliers and customers (quality or overshippment)
- Update scrap and variance of consumption in the system
- Analyze and correct the stock issues.
- Organize and manage the W2W inventory, analyze the results and setup the action plan.
- Setup the daily Cycle count inventories, archive and register the adjustment transactions in the system, analyze the results.
- Analyze and suggest actions for Obsolete & Excess reduction.
- Report the weekly stock value, excess & obsolete monthly report and stock adjustment value and rate, scrap adjustment and analyze.
Competence & experience:
- Bac +5 in logistics or management.
- At least 1 year of experience in automotive industry
Language Skills: English, French , Spanish
Work Location: Tangier SSD/TRIM
EHS Engineer
The EHS Engineer will foster a culture of proactivity, accountability, engagement and sustainability through robust programs and processes with the primary goal of reducing work accident and environmental impact. He will plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
Main missions:
-
- Implement a Safety Management system based on ISO 45001 standard.
-
- Maintain and enhance the ISO 14001 management system, and upgrade it to 2015 version.
-
- Ensure compliance with Moroccan legislation.
-
- Implement Lear directives in site: Loss control, Lockout tag out and forklift.
-
- Plan, implement, and coordinate safety programs to prevent or correct hazardous environmental working conditions.
-
- The EHS Engineer will carry out audits of the EH&S Management System in plant (special needs or planned) in order to comply with the procedures relating to Health, Safety and Environment of LEAR and Moroccan legal regulations.
-
- Perform the task-based risk assessment and develop actions how to mitigate them, and determining the related environmental impacts.
-
- Recommend process and product safety features that will reduce employees’ exposure to chemical, physical, and ergonomic work hazards.
-
- Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulatory compliance.
-
- Investigate work accidents, injuries, occupational diseases and environmental incident to determine root causes and corrective/preventive measures.
-
- Provide technical advice and guidance to organizations on how to handle health-related problems and make needed changes, and review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
-
- Conduct or coordinate employees training in areas such as safety laws, work instructions, hazardous conditions monitoring, and use of PPE.
-
- Evaluate adequacy of actions taken to correct health inspection violations, and the effectiveness of various engineering control mechanisms.
-
- Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
-
- Initiate and follow up with other departments the site sustainability program.
To be successful for this role:
-
- Engineer (Bac+5) or equivalent
-
- 02 years minimum experience in an industry field
-
- Background in EHS, Mechanical, Electricity, Microsoft office).
-
- Capacity to support stressed situation, work in team, and work in shopfloor
-
- Good communicator and listener
Language Skills:
- French and English: Fluent.
- Spanish is an advantage
OEE Responsible
We are hiring in Rabat Electronic plant OEE Responsible.
Main missions:
- Assists and supports Production & Maintenance managers, reporting to Operations Manager
- OEE Manufacturing Indicator Daily monitoring and follow up during Serial Production & New projects Launching / Process series phases
- Monitors specifically Availability & Efficiency performance results, making improvement proposals and following/consolidating the corresponding Improvement plan in coordination with Area Production managers, Maintenance, Quality and Methods/Manufacturing Engineering; implement additional tools to capture data when proceed
- Leads and supports specific Continuous improvement activities: LEAN projects leadership, Reference/product changes management, SMED deployment, Layout optimization, Line Capacity balancing, Parts handling and Material Flow improvement, Inventory reduction,
- Supports correct manufactures procedures in new projects, maximizing efficiency
- Support deployment of norms and internal policies: Safety and Quality rules, Manufacturing Procedures, Continuous Layered audits activities, Best practices
- Learns the rules; understands them; follows them, and participates in the energy, environment, safety and health program
- Reports all incidents, accidents and unsafe conditions and acts to supervisors or uses the system set up to facilitate reporting.
- Takes personal responsibility for keeping selves, co-workers, and equipment free of hazards.
- Participates on saving energy and proposes suggestions to control it.
- Ensure the conformance of products and processes according IATF, Customer specific requirements, and regulatory requirements
To be successful for this role:
- Proven experience in a similar position and environment (3 years at least)
- Engineering degree
- Good communication skills: French, English is a must
Engineering Process Coordinator
As an Engineering Process Coordinator, you will be leading: Process engineering team for manufacturing process setup, cross functional team to improve the efficiency and also the risk assessment & PFMEA reviews according .
Your missions:
- Determine space requirements for several functions and plans, improve production methods including lay-out, tooling, production equipment, material and assembly methods, and manpower requirements.
- Works in conjunction with planning and design staff to configure the product and tooling to ensure efficiency in the means of production.
- determine the production time and identifies the necessary methods to optimize the production program.
- Identify jointly with the production manager the tools needed to make changes in the production, taking into account the environmental aspects.
- Apply statistical methods to make estimates of production potential for future orders.
- He oversees the monitoring of the Quality Plan of the company in order to optimize production methods and processes.
- Inform the head of the engineering department of the company about the manufacturing capacity in front of the production program and any problems to facilitate decision-making.
- He is responsible for detecting with the central engineering of any new developments of tools and machinery in order to optimize the manufacturing process.
- encourages and realizes the introduction of new manufacturing systems.
To be successful for this role:
- Excellent project management skills
- Leadership & Team Mgt
- Self-starter
Language Skills:
Strong communication skills both in French and English
Work Location:
- Lear corporation Kenitra (E-Systems)
Supply Analyst
Your missions:
- Manage the supply of materials that correspond to the assigned suppliers and that are necessary for manufacturing, in accordance with the guidelines of the Chief Procurement Officer, with the objective of obtaining in the suppliers’ deliveries the standard levels of quality and service as well as Costs consistent with the objectives of the companies
- Be responsible for ensuring that the supply of the materials of the supplier (s) assigned by the person in charge of the supplies is in conformity with the needs of my manufacture, on time.
- Ensure the follow-up and the necessary steps to ensure the time of reception of the material of the supplier (s) assigned, so that any failure likely to occur in the procedure is brought to the knowledge of the planning department, in order to prevent any failure towards the customers.
- Be responsible for the management and inventory analysis of the materials of the supplier (s) assigned.
- Carries out the simulations and the analyzes necessary in order to foresee sufficiently « breaks » of stocks or the creation of excess material of the supplier (s) assigned in advance, in collaboration with the decomposition planning and takes the necessary corrective measures.
- Be the interlocutor of the department of quality control, for the batches of material rejected, and undertakes the appropriate approaches with a view to their solution.
- Ensure the respect of the commitments signed or agreed by the Purchasing Department with the supplier (s) assigned with regard to the supply, and communicates to him any anomaly.
To be successful for this role:
- Ability to work in a high-tempo environment and interact with team members over a wide scope of the organization.
- Minimum 2 years experiences in Demand & Supply Management
- Good Business English
- Expertise in Supply Chain Management
- Basics of supply chain is a plus
- Good negotiator skills
Language Skills:
- Strong communication skills both in French and English
Work Location:
- Lear corporation Kenitra (E-Systems)
Lear corporation – أهم اعلانات
Technicien Process Coupe
Lear corporation Trim Tanger offre une nouvelle opportunité de se joindre à son équipe à travers le poste de Technicien Process Coupe.
Lear cherche des individus enthousiastes et doués ; si vous êtes à la recherche de nouveaux challenges, nous avons le travail que vous cherchez.
Missions :
- Etudier les éléments de fabrication et définir les procédés, les modes opératoires et les moyens de production.
- Maîtriser les techniques de calcul de la capacité/charge de production.
- Définir et mettre à jour les temps standards de coupe.
- Etablir et participer à la rédaction des cahiers des charges pour l’acquisition des équipements et outillages de production.
- Repérer et analyser les dysfonctionnements, prendre des mesures correctives et surveiller leur mise en œuvre.
- Analyser les fiches techniques de coupe pour améliorer les performances (temps, coût, qualité…) en travaillant sur les paramètres des machines et les règles de CAO.
- Définir et améliorer en permanence les paramètres standards de coupe associés à chaque type de matière (sur LECTRA ; GERBER …).
- Participer au lancement des nouveaux projets (ou des changements ingénierie) en définissant le process de coupe adéquate.
- Assurer le support technique aux différents départements : production, logistique, qualité, Maintenance…
- Proposer et piloter des améliorations process et suivre les indicateurs relatifs à l’activité du service.
- Définir les layouts (nouvelles zones de production, réimplantation …) et assurer la mise en place des équipements à base de ces lay-out.
Competences & experience:
- Bac+2 minimum (Technique)
- Justifier au moins 3 ans d’expérience dans un poste similaire de préférence dans l’industrie automobile.
- Maîtrise des outils bureautiques (Excel…), outils de conception (CATIA, AUTOCAD) …
- Esprit d’initiative et d’analyse.
Language Skills:
- Maîtrise de la langue française, l’anglais est souhaitable.
Work Location:
- Tangier SSD/TRIM
